Our Microcement Floor plaster is developed with the latest in polymer admixture technologies all blended with high quality white cement, silica flour and graded silicas. This line of plaster comes as a basecoat 50 mesh for embedding mesh and smoothing over tiles and subfloors, as well as a 75 mesh fine grade that is useful in creating polished or medium textured finishes and comes in a light grey meant to mimic the natural look of concrete, and a white base that can be colored with our powder tints. Our Microcement can be used on interior floors, exterior driveways, walkways, pool decks, countertops etc Microcement Floor should be applied in a minimum of 3 coats over our interior or exterior supplied quartz stone primer, Ardex p82, or epoxy primers for exteriors etc. This product is very strong, highly modified, and comes in a dry bag mix that does not require any additives other than water. Microcement naturally has heat reduction characteristics that make it great for outdoor areas where you will be walking barefoot. This product is great for new build floors or for going over existing tiled floors etc.
Recommended for areas that are stable, sound and not flexible with moving joints.
Interior / Exterior
Rated for vehicular traffic, residential and retail floors, commercial showers, countertops new or resurfacing, etc
Seal after 12 hrs dry time
Light traffic 12 hrs
Compressive strength: 5200 psi
Tensile strength: 927 psi
Freeze Thaw: no visible effects
Impact resistance: 576 inch/lbs
Recommended Dry Time: Always allow each coat to dry min 10 hrs prior to overcoating, and allow Polyseal at least 12 hrs prior to overcoating with Poly wb or Hi wear.
Countertops: Always use Poly wb low sheen instead of polyseal, in two layers, prior to applying the Hi wear sealer. Allow a full 12 hrs overnight cure of the Poly wb before coating with the oil based Hi wear sealer. Poly seal is not heat stable under extreme temperatures and not recommended for Countertops.